Melbourne
A lane behind a terrace is not a yard at Dandenong
Stock held for Melbourne is matched to the street, and the delivery is quoted to that address, including the crane, the permit or the dock window when the lane requires them. Inner terraces lose the front-of-house option wherever a wire or a width gets in the way. Industrial ground in the west and the south-east is the version where a rigid still fits.
- Where it is loaded
- City allocation, then the run to the lane or the yard
- What sets the day
- A yard drop is straightforward; a lane or tram wires need extra time
- Usual truck
- Sliding bed where a shorter unit has a clear run; a crane for lanes; a side loader for a long unit into a yard
Lanes
Measure the lane, not the photo
Fitzroy, Collingwood, Carlton and Richmond lose a simple reverse wherever the span is tight. A lane behind a Collingwood terrace can look wide in a photo and still fail at a meter box, a pole or a change of width halfway down.
Winter
Drips on the floor through July
A cold night on a mild day beads the ceiling. It is the usual July complaint and it is often not a failed roof. Pull the doors to and look for daylight. If the steel is dark, vent the box and keep goods off the ply. Clothing and cardboard suffer. Tools do not.
West
Basalt clay at the edge of the city
Through Werribee and out at Sunbury the ground softens after rain and cracks in a dry spell. Pads under the corners matter there in a way they do not on a factory slab. Footscray, Yarraville and Williamstown are inner-west deliveries with their own street widths. Truganina and Tarneit are the growth edge, estate frontages rather than bluestone lanes.
South-east
Dandenong is a yard conversation
Dandenong, Springvale and Keysborough are where workshop overflow and a long unit make sense. Cranbourne and Frankston are more often houses. A Melbourne order stays with this city. A drop people describe as Melbourne when they mean Geelong or Bendigo should be named properly, because the truck and the day are not the same.
Lanes, July drips and the fringe
A lane behind a Collingwood terrace looks wide. What should be measured?
The narrowest point, including poles and meters, and the height of any wire across the street where the crane would stand. The photo from one end flatters it. A tape at the pinch is the number we need.
Drips on the floor through July. Has the roof failed?
Check for daylight with the doors pulled to. No light usually means condensation from cold nights. Vent it and pallet the goods. A bright gap is a different shell, swapped before it is cut into or filled.
We are cutting a servery into the side. What should we start with?
A square shell in sound condition, chosen for that work, not the cheapest box that happens to be nearby. The cut, the lining and the certifier come after the steel is worth modifying. Say it is a servery when you order.
Get a price
Lane, estate fringe, or a factory yard?
The suburb, and whether tram wires or a dock window are part of the morning.
Rather talk? Call us on 0477 410 500, Mon–Fri 7:30am–5pm, Sat 8am–12pm